JACKCO / AirVANTAGE / ZETA / PneuStream

	Swirl Removing Tutorial
		Step 9: Leave a little residue of polish as you run the machine over the paint. The less residue you leave, the more aggressive the cut will be so it may take you a time or two before you find exactly how wet you need to keep the pad. For softer paint use a little more polish and less pressure.
		Step 10: Wipe the residue polish off the paint. When buffing, keep a microfiber cloth handy, usually either on the car or in your front pocket. By wiping the residue off the panels as you go, you can see if there is anything you've missed. Also, if you fling Sure Finish Polish, wipe up the fling as you go so you don’t have to rub it off later. It can get pretty sticky if you let it stay on a surface too long.
		Step 11: This is the finish after the two steps but without any wax.
		Back | Page 4

Home |  About Us |  Contact Us  | Warranty